Grow Room Design, Rev. 0

The Grow tent will be about 5’x5’x6′, with a 400 watt lamp (which covers 3’x3′). 4 plants, each in a 5 gallon bucket on top of a milk crate. By putting the buckets on milk crates, I should be able to drain back to the reservoir with gravity. There is a carbon filter in the top corner and an air intake in the bottom corner. The brown rectangle will be the controller home, with built in relay controlled outlets, sensor hook-ups and relay hook-ups.

The grow tent will be anchored to a sheet of pressure treated plywood, to help insulate it from the basement floor and give me a more level working surface. I also plan on anchoring the roof piece to the basement ceiling (which is bare beams).

The siding material will be Foylon. Still to be determined is exactly how I will attach the Foylon. The plan in my head is adhesive Velcro strips and overlapping flaps.

Happy Toking!
Indica Sloth


Further Reading:

http://www.littlegreenhouse.com/plans/hoop-greenhouse.pdf

http://www.420magazine.com/forums/how-grow-marijuana/71077-what-reflective-materials-can-i-use-my-grow-room.html

Advertisements

2 responses to “Grow Room Design, Rev. 0

  1. Pingback: Grow Room Project | Aeroponics for Cannabis

  2. Pingback: Enclosure Design, Rev. 2 | Aeroponics for Cannabis

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s